SANAYE GAZ IRAN PRODUCTS
The Axial Flow Valves
Class 300/600
The Axial Flow Valve is an industry standard for pressure regulation in distribution and transmission applications, SANAYE GAZ IRAN offers a full range of Axial Flow Valve regulators up to Class 600 applications and sizes fram 2" up to 8".
The regulator is pilot controlled. Sanaye Gaz lran can provide a full range of supporting controls.
The design of the Axial Flow Valve means that it can be used in a wide range of applications. A simple change of sleeve upgrades the axial flow valve from one pressure range to another. A change of control will convert the axial from pressure to volumetric control or to monitor override, or safety control.
Gas Pressure Regulator
for Domestic Use
5,10,20 SCMH
- Available with full capacity internal Relief, Overpressure Shutoff and Under pressure Shutoff
-
Available in 90 or 180 degree Valve Head
40-250 SCMH
- High Capacity Range
-
Available with full capacity internal Relief, Overpressure Shutoff and Under pressure Shutoff
-
Available in 90 or 180 degree Valve Head
Diaphragm Gas Meter
- Maximum 3% Accuracy
-
Minimum Pressure Loss
-
-29C to 60C Ambient Temperature
-
Threaded / Flanged type Connections
Control Valve
Type 119
Type 119 switching valve is used for on-off or throttling control of noncorrosive or mildly corrosive gases.
It is designed to meet low-pressure gas application requirements in many varied industries.
Pressure Regulator
Type 12p
The regulator 12P is designed for use in transmission and distribution networks, as well as commercial and industrial supplies.
The regulator 12P is a pilot-operated gas pressure regulator available with or without an integrated safety shut-off device.
The pilot Series RP and feeder Series RV ensure constant outlet pressure when the flow and / or the upstream pressure varies.
Pressure Regulator
Type 67AF
The 67AF Series small-volume regulators are typically used to provide constantly controlled reduced pressures to pneumatic and electropneumatic controllers and other instruments. These self-operated regulators are suitable for most air or gas applications and may even be used for liquid service where material compatibility exists.
Other applications include providing reduced pressures to air chucks, air jets, spray guns, and liquified petroleum gas (LPG) torches and burners.
Pressure Regulator
Type Reflux 819
Reflux 819 is a pilot-controlled pressure regulator for medium and high pressure applications.
Reflux 819 is normally a fail to close regulator and will close under the following conditions:
- breakage of main diaphragm
-
lack of pressure feeding to the pilot loop.
This regulator is suitable for use with previously filtered, non-corrosive gases.
